Mumbai
08048037902
+919869911653

ss 316 erw pipe

SS 316 ERW Pipe/Tube SS 316 ERW means Stainless Steel Grade 316 Electric Resistance Welded pipe or tube. It has a longitudinal welded seam and is valued for strong corrosion resistance, especially in chemical or chloride-containing environments. Material composition (typical) Element Typical specification Chromium 16–18% Nickel 10–14% Molybdenum 2–3% Carbon max. 0.08% Iron Balance Molybdenum is the key addition that makes 316 more resistant to pitting and crevice corrosion than SS 304. Main properties - Austenitic, generally non-magnetic in annealed condition - Excellent corrosion resistance in many acids, chemicals, and marine atmospheres - Better chloride resistance than SS 304, though it is not fully immune to chloride stress-corrosion cracking - Good weldability and formability - Approximate density: 8.0 g/cm³ - Typical annealed strength: tensile strength about 515 MPa minimum and yield strength about 205 MPa minimum; actual values depend on the applicable standard and dimensions. ERW manufacturing process A stainless-steel strip is formed into a round shape. Its edges are joined by electrical resistance heating, creating a straight longitudinal weld. The weld bead is then treated/finished, and the pipe may be solution annealed, pickled, polished, tested, and cut to length. ERW is usually more economical than seamless pipe and works well for many low-to-medium pressure and general service applications. Typical applications - Chemical and pharmaceutical plants - Food, dairy, brewery, and beverage processing - Water-treatment and desalination systems - Marine/coastal installations - Heat exchangers and condensers - Oil and gas auxiliary lines - Architectural handrails and process equipment SS 316 vs. 316L - 316: Carbon max. 0.08%. - 316L: Carbon max. 0.03%. For welded pipe, 316L is often preferred because its low carbon content reduces the risk of sensitization and intergranular corrosion near the weld after welding. If the pipe will be welded in fabrication or used in corrosive service, ask whether 316L ERW is more suitable. Common standards The right standard depends on whether the product is sold as pipe or tube and its service: - ASTM A312 / ASME SA312: welded and seamless austenitic stainless-steel pipe for high-temperature and general corrosive service. - ASTM A269: seamless and welded stainless-steel tubing for general service. - ASTM A249: welded austenitic stainless-steel boiler, superheater, heat-exchanger, and condenser tubes. ASTM A312 overview ASTM A269 overview Available forms and finishes - Round pipe/tube; also square and rectangular welded sections - Common finishes: mill finish, annealed and pickled, bright annealed, satin/polished - Dimensions can be specified by OD × wall thickness, NB/schedule, or custom size - Common supply lengths: 6 m, though custom lengths are common Limitations - Do not assume 316 is suitable for concentrated/hot chlorides, strong hydrochloric acid, or highly aggressive seawater exposure. - For severe chloride service, consider duplex grades such as 2205, super duplex, or higher-alloy stainless steels after engineering review. - ERW seam quality and post-weld heat treatment matter in high-pressure, cyclic, critical, or code-controlled service. Seamless pipe may be required by a project specification. What to check before buying 1. Confirm grade: 316 or 316L, preferably UNS S31600/S31603. 2. Specify the standard: A312, A269, A249, or project requirement. 3. Confirm OD/NB, wall thickness/schedule, length, finish, and end type. 4. Request an MTC/MTR (Mill Test Certificate) showing heat number, chemistry, and mechanical results. 5. Check weld testing and NDT requirements: eddy-current, hydrostatic, pneumatic, radiography, etc. 6. For corrosion-sensitive service, ask for solution annealing, pickling/passivation, PMI, and ferrite-control requirements where applicable. If you tell me the intended use, size, pressure, fluid, and temperature, I can recommend whether SS 316 ERW is appropriate and give the exact specification to place on a purchase order.
 2026-11-18T13:33:03

Keywords